menu

Search 4,511 docs, articles & videos from the world’s leading Automotive part manufacturers

  

143 results found for MAHLE

...Not fully sealed? Installing coolant thermostats correctly The coolant thermostat performs numerous important functions in a vehicle. As a result, it is advisable to re place the thermostat promptly in the event of a fault. Time and again, thermostats are returned to MAHLE under com...

...Technical Messenger 03|2021 Did your Visco® fan or clutch get damaged during transport? Before installing Visco® fans and clutches, it is essential to check if the components have been damaged in transit. Visco® clutch housings contain a reservoir chamber that is filled with a prede...

...Mahle Technical Messenger Issue no. 04/2023 Installation notes for the oil filter insert OX 1141D There is a risk of inadequate lubrication if the O-rings are mounted incorrectly. The oil filter insert OX 1141D is supplied with all required sealing rings. However, if they are not mou...

...Technical Messenger 04|2023 Installation notes for the oil filter insert OX 1141D Mounting the O-rings correctly for the oil filter insert OX 1141D is necessary for proper lubrication. While the oil filter insert comes with all necessary sealing rings, their positioning can be mixed up ea...

...Installation note for MAHLE OC 593/4 and OC 593/3 spin-on oil filters This oil fi lter with integrated anti-drain back mechanism is being fi tted in various models and brands of the VW Group (1.2 L and 1.4 L TSI gasoline engines). It is located on the generator bracket and is screwed...

...Installation note for piston pin circlips Various types of piston pin circlips are available, which are fitted in different ways. To protect piston pins against axial movement during operation, circlips are fitted in most combustion engines. In such cases, the piston pin still has lim...

...To protect piston pins against axial movement during operation, circlips are fitted in most combustion engines. New circlips must be fitted during reassembly if a piston with a floating pin is repaired or replaced. Always double-check to ensure you’re installing replacement circlips...

...Technical MessengerWorkshop InformationIssue no. 07/2018: Installation note for oil filter inserts OX 379D an\ d OX 370D1www.mahle-aftermarket.comIMPORTANT! Prior to assembly, gaskets should always be coated with clean oil in order to prevent damage and leakages. An excessively high tight...

...Incorrectly fitted air filter element LX 2049/4 in Audi V-type engines Technical Messenger Issue 3/2017 If an air filter element is incorrectly fitted, this can cause noise disturbance and generate entries in the fault memory. Possible cause: the air filter element is fitted at an a...

...Technical Messenger When replacing a coolant thermostat, there are certain things you need to be aware of. The coolant thermostat performs many important functions in a vehicle, so it must be replaced as quickly as possible if it becomes defective. An excessively high or excessively low...



3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12
footerlogo
popup