...Citroen / Fiat / Peugeot C4, C5, C8, Synergie, Xsara / Ulysse / 206,307, 406, 407, 607, 806, 807 1.8i, 2.0i, 2.2i May 2012 IMPELLOR SIZE VARIATIONS There are 2 designs of Water Pump available for the vehicles listed above. FWP1937 incorporates an impellor with a 61mm diameter. Fit...
...Water Pump Peugeot and Citroen FWP1937 & FWP2125 Concerns Concerns have been raised over the difficulties some customers have encountered when fitting the above pumps to the OE plastic backhousings. This is in part due to the mounting holes of the pump having a diameter of 6.70mm a...
...Water Pump Noise WHISTLING OR SQUEAKING A problem becoming increasingly common is excessive noise from the mechanical seal, especially at low rpm. This issue is related to the introduction of harder materials such as hard carbon used in the dynamic seal pack (which has greatly reduced...
...Dynamic Seal Pack uter casing pressed into the pump body and the inner part fixed outer casing pressed into the pump body and the inner part fixed to the integral shaft and bearing set. Within this housing are the ceramic and carbon slip rings which are the active components of the seal...
...Water Pump Components 1. Drive pulley or flange 2. Pump body, usually constructed from die cast aluminium or cast iron. 3. Shaft and bearing set, typically double row ball or ball-roller for heavy duty applications. 4. Dynamic seal pack, consists of rotating slip rings with sealing...
...VAG :- Seat Cordoba, Seat Ibiza, Skoda Fabia, Skoda Roomster, VW Fox, VW Polo VAG Suspension Bush FSK6368 & FSK6368HD Continuing deterioration in road surfaces and the further introduction of speed calming devices has resulted in increased loads placed on steering and suspension com...
...Top Strut Mounts Citroen C2, C3, C3 Pluriel PSA 1007 To try and alleviate some of the confusion when ordering top strut mountings for the above models the images below show the difference between the two mounting choices....