menu

Search 4,541 docs, articles & videos from the world’s leading Automotive part manufacturers

  

145 results found for MAHLE

...Technical Messenger Workshop Information Issue No. 06/2018: Fluctuating coolant temperaturewww.mahle-aftermarket.comIMPORTANT! Modern cooling circuits are highly complex systems and must therefore be repaired with due care. Above all, proper bleeding is extremely important.When fluctuation...

...Technical MessengerWorkshop InformationIssue no. 05/2018: Defective map-controlled thermostatwww.mahle-aftermarket.comIMPORTANT! The retaining clamps on the connector plugs must not be released or removed. When installing thermostats, the use of additional sealants is generally not permi...

...Alternator not working Technical MessengerWorkshop InformationIssue no. 04/2018: Alternator not workingwww.mahle-aftermarket.comIMPORTANT: Always interrupt the electrical circuit (disconnect the battery earthing cable) before performing any work on the alternator. Labeling the connections...

...Technical MessengerWorkshop InformationIssue no. 03/2018: Damaged oil filter paperwww.mahle-aftermarket.comIMPORTANT: Besides complying with the manufacturer's specifications, oil and filter changes should always be adapted to suit the individual driving profile! The use of high-quality en...

...Technical MessengerWorkshop InformationIssue no. 02/2018: Additional securing aids for air filter element LX 1566 www.mahle-aftermarket.com IMPORTANT: The difference between the appearance and design of this and comparable air filter elements is not a defect. Quite the opposite: it ensur...

...Technical Messenger Workshop Information Issue no. 01/2018: Different fuel filter elements in the same housing heightwww.mahle-aftermarket.comIMPORTANT: Before fitting the new filter element, be sure to drain any remaining fuel from the filter housing and dispose of it properly. This min...

...Technical Messenger Workshop Information Issue no. 10/2017: Leaves in the water tank www.mahle-aftermarket.comImportant: Leaves should be removed from the water tank on a regular basis, particularly in autumn. In general, it is recommended to change the cabin...

...Technical MessengerWorkshop InformationIssue no. 09/2017: Connection defect when changing the starter motorwww.mahle-aftermarket.comFigure 1: Wiring diagram with clamp 50 (start control) and clamp 45 at the solenoid output to monitor the starting processImportant: When removing the starte...

...Mahle Technical Messenger 8 Workshop Information Issue no. 08/2017: Bleeding the fuel system following a filter change www.mahle-aftermarket.com Figure 1: Bleeding using a commercial vacuum pump. Important: Fuel lines must be disconnected using an appropriate tool before opening the...

...Technical MessengerWorkshop InformationIssue no. 07/2017 – Power loss as a result of defective crankcase ventilation www.mahle-aftermarket.comFigure 1: Installation position of the PCV valve on the cylinder headFigure 2: Ventilation downstream of the turbocharger directly into the inlet...



4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13