menu

Search 4,584 docs, articles & videos from the world’s leading Automotive part manufacturers

  

206 results found for Pierburg

...Many of our customer enquiries are related to the technical data for our fuel pumps for small series or special applications. The following selection of pumps for universal use is intended as a decision-making aid for finding the suitable pump for the relevant requirements. These pumps ar...

...EGR FAULT DUE TO FOREIGN BODIES FROM THE EXHAUST TRACT POTENTIAL COMPLAINTS: • Irregular engine running • Loss of power • Jerking • Diagnostic trouble code P1444, P16786 Foreign bodies from the catalytic converter area can be sucked through the lines of the exhaust gas...

...THROTTLE VALVES AND REGULATING THROTTLESWHAT IS THE DIFFERENCE?In a petrol engine, the throttle valve impacts the quantity of air that is drawn in. More or less fresh air or air-fuel mixture flows into the cylinder according to how open the valve is. The position of the throttle valve dire...

...THROTTLE VALVE 7.03703.38.0/39.0 DIFFERENCE: VACUUM CONNECTION The two throttle valves 7.03703.38.0 and 7.03703.39.0 are identical technically. The throttle valve 7.03703.38.0 also has a vacuum connection. Competitors and vehicle manufacturers (OE) only offer the version with vacuum...

...EGR Troubleshooting basics Exhaust gas recirculation (EGR) is a reliable and practice-proven method of emission control. As a result of exhaust gas, the oxygen content in the air-fuel mixture is reduced and the combustion temperature in the cylinders are lowered. Pierburg explains the bas...

...Electric fuel pumps – blocked pre filter Most electric fuel pumps are flushed by the fuel and lubricated and cooled in the process. There is a risk of “dry running” in the event of constrictions or blocks on the intake side....

...Cooled exhaust gas recirculation EGR Ever more stringent emission regulations require a constant improvement in pollutant reduction methods. For diesel engines, this particularly applies to a further reduction in nitrogen oxides (NOx). Cooled exhaust gas recirculation (EGR) can play a s...

...Fuel delivery modules: Notes for installation...

...Electric fuel pumps E1F, E2T and E3T Blocked pre filter SI 1761 Most modern fuel pumps are flushed through with fuel, which lubricates and cools them. If this does not happen to a sufficient extent, e.g. through soiling, there is a risk of "dry running". Fuel pumps in the E1F, E...

...Cracked connecting rodsSI 1492 For technical personnel only! Page 1/1 Cracked connecting rods Important information on handling Connecting rods form the link between the crankshaft and the pistons and transfer the gas and inertial forces to the crankshaft. For the connecting...



1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 ...[Next 10 of 21 pages] ...
footerlogo
popup