3957 results

• 
• Type

  Technical Bulletin

• Concentric Slave Cylinder (CSC) Bleeding Process

• May 18

• LuK (132) Contact
• 

...Bleeding process of CSC 510 0097 10 Modified hydraulic connectionManufacturer: Dacia Nissan RenaultFor current listing refer to parts catalogueThe hydraulic connection of concentric slave cylinder 510 0097 10 has been modified. It now corresponds to the configuration used in current veh...

• 
• Type

  Technical Bulletin

• Audi, Seat, Skoda and VW. Various 2.0 TDI Tensioner Pulley Variations

• May 18

• Contitech (163)
• 

...Timing belt kit CT1134K1/WP1/WP2 for Audi, Seat, Skoda and VW. Various 2.0 TDI Common Rail models, 1st generation Problem: The supplied V56340 tensioning pulley differs visually from the pulley installed in the vehicle and seems as though it cannot be correctly tensioned. Cause: In...

• 
• Type

  Technical Bulletin

• Automatic Belt Tensioner Variants on Ford Petrol Engines

• May 18

• FAI (38)
• 

...faiauto.comT9315: One Tensioner, two designs.Automatic Belt TensionerContitech V55226INA 531058610QH QTT948Febi 11291Gates T43127SKF VKM14222NTN GT352.18T9315 has been in FAI's offer for many years as it is used in TBK104 and fits a large range of Ford petrol engines. The tensioner which...

• 
• Type

  Technical Bulletin

• Damaged oil filter paper

• May 18

• MAHLE (151)
• 

...Technical MessengerWorkshop InformationIssue no. 03/2018: Damaged oil filter paperwww.mahle-aftermarket.comIMPORTANT: Besides complying with the manufacturer's specifications, oil and filter changes should always be adapted to suit the individual driving profile! The use of high-quality en...

• 
• Type

  Technical Bulletin

• Bolt Tightening Sequence - Crankshaft Seal

• May 18

• FAI (38)
• 

...faiauto.comOS1002R Bolt Tightening Sequence Best Availability. Best Value. Best Quality. Best Service. Technical Bulletin May 2018+44 (0) 1525 351800 TB0012...

• 
• Type

  Technical Bulletin

• Damper Pulley Bolt Torque Settings - Ford 2.2 & 2.4 Duratorq

• May 18

• FAI (38)
• 

...faiauto.comFord 2.2 & 2.4 Duratorq Bolt Torque Settings CAUTION: Damper pulley retaining bolts MUST only be used 3 times Best Practice:After installation, stamp the damper pulley bolt head with a centre punch to indicate usage. The bolts should be tightened in 2 stages Stage 1: 30 Nm Stage...

• 
• Type

  Tech Tip

• LuK Clutch Academy Renault Modus 1.4P

• Apr 18

• LuK (132) Contact
• 

...Luk Clutch Academy Renault Modus 1.4P This month, REPXPERT's Alistair Mason replaces the clutch on a 2005 Renault Modus, which was fitted with a 1.4 (K4J770) petrol engine, had covered more than 60,000 miles and suffered from clutch judder. For this type of repair, a two-post ramp, engi...

• 
• Type

  Tech Tip

• Clutch component failure diagnosis part 2

• Apr 18

• Borg & Beck (26)
• 

...Clutch component failure diagnosis part 2 Despite the complex nature of the modern clutch system, many technicians remain under the misapprehension that clutch replacement is a simple and straightforward affair. However, with clutch replacement now often taking several hours, it's impera...

• 
• Type

  Tech Tip

• Trouble Tracer - Brake Pads

• Apr 18

• Ferodo (22)
• 

...Trouble Tracer Brake Pads Brake specialists Ferodo have produced a useful fault diagnosis chart to highlight the issues that can result from incorrect brake pad fitment, pad handling and other brake problems. Below are some of the examples from the chart. Pad Contamination (1)
 Appear...

• 
• Type

  Technical Bulletin

• Tales from the Helpline - Look beyond

• Apr 18

• Autobiz (359)
• 

...Question: We have a 2015 Mercedes-Benz Vito in our workshop with the Airbag (SRS) warning lamp illuminated, seat heating not working, and several electrical related trouble codes stored. Have you any ideas where to start to fix this vehicle? We recently had a call from a garage regarding...