4616 results

• 
• Type

  Technical Bulletin

• How to identify defective shocks and prevent hazards

• Aug 17

• MEYLE (51)
• 

...How to identify defective shocks and prevent hazards...

• 
• Type

  Technical Bulletin

• Spark Plug Fouling

• Aug 17

• NGK (22)
• 

...Spark plug fouling his video explains what happens if a spark plug becomes fouled, and the root causes for this....

• 
• Type

  Technical Bulletin

• Use of lubricants with release bearings

• Aug 17

• LuK (132) Contact
• 

...Installation notice Use of lubricants with release bearingsThree different types of bearing housing are used in the release bearings of the current product range. Different methods must be used when performing maintenance and repair work on them. Technicians should obser ve the followin...

• 
• Type

  Technical Bulletin

• LuK RepSet 620 3115 00 Installation notice

• Aug 17

• LuK (132) Contact
• 

...LuK RepSet 620 3115 00 Installation notice Note:For repair and maintenance work on clutches, Schaeffler Automotive Aftermarket always recommends use of special tool Part. No.: 400 0237 10. Instructions explaining how to use the tool are available at www.repxpert.uk.Installation notice...

• 
• Type

  Technical Bulletin

• LuK clutch discs may be smaller than OE

• Aug 17

• LuK (132) Contact
• 

...LuK clutch discs Smaller diameter than original equipmentVehicles have to be as light as possible in order to meet increasingly strict CO2 emission limits. That's why engineers and scientists are constantly working to create lighter materials and innovative manufacturing methods. Their fin...

• 
• Type

  Technical Bulletin

• Troubleshooting wheel end bearings

• Aug 17

• FAI (38)
• 

...MAKE IT EASY. MAKE ITwww.moogparts.eu Challenge A vehicle's ABS control module is designed to notify the driver with a warning light if there is a malfunction in the system. The malfunction is rarely the modul or ABS itself. It is often one or more sensors, or the wiring to the sensors. Th...

• 
• Type

  Technical Bulletin

• 2.0 FSi/TFSi High pressure fuel pump cam follower replacement febi.bilstein 9.36K subscribers

• Aug 17

• febi (177)
• 

...In this video, we look at the high pressure fuel pump which is fitted to several common Volkswagen AG vehicles fitted with the 2.0 FSi and TFSi engines and the cam follower which is a common wear item of this system and its replacement using febi part 37162. An increase in engine noise, lo...

• 
• Type

  Technical Bulletin

• Damaged Caused by Burnt Out Starter Motors

• Aug 17

• Autoelectro (21)
• 

...Underlying issues causing starter motor failure must be investigated – not ignored. Autoelectro, the UK's largest independent rotating electrics remanufacturer and supplier, has vast experience in the automotive industry. Here, the company has leaned on more than 30 years' experience...

• 
• Type

  Technical Bulletin

• Diagnosis of the twin-bearing assembly - 02T transmission VAG

• Aug 17

• LuK (132) Contact
• 

...1. Operate the transmission until it is warmed up.2. With the clutch engaged and the trans-mission in neutral, increase the engine speed to approximately 4000 rpm.3. Step on the clutch pedal and shut the engine off at the same time.4. If you hear rattling noises which change as the speed...

• 
• Type

  Technical Bulletin

• Power loss as a result of defective crankcase ventilation

• Jul 17

• MAHLE (159)
• 

...Technical MessengerWorkshop InformationIssue no. 07/2017 – Power loss as a result of defective crankcase ventilation www.mahle-aftermarket.comFigure 1: Installation position of the PCV valve on the cylinder headFigure 2: Ventilation downstream of the turbocharger directly into the inlet...