menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4511 results

...Technical Information Receptacle for H1 und H7 bulbs Design and function The receptacles are equipped with two prefabricated cables and butt plugs. The butt plugs are suitable for cable diameters of up to 1 mm². However, the lengths of the cables are different. - The H1 socket has a...

...Technical Information Retrofitting daytime running light in vehicles with PWM signal When daytime running lights are retrofitted, the changeover relay included in the scope of supply can "vibrate" when the vehicle lighting is switched on. Since some vehicle manufacturers trigger the...

...Technical Information Rota LED beacon Product features Installation information During installation of the fixed body variant make sure that the cables passage to the Interior is sealed. This can be done, for example, with a suitable rubber...

...Technical Information Beamsetter SEG IV C General points The development of modern lighting systems proceeds a ll the time. Progress can be clearly seen with exterior lighting, and headlights in particular. Xenon headlights with "intelligent" light regulation have found their way i...

...Technical information LED daytime running lights 2PT 980 680-101 to - 861 with simplified assembly General instructions Daytime running lights increasingly gain importance in Europe and beyond. Transport ministers, automobile clubs and car drivers have recognised the clear advan...

...Technical Information Thermal shock Definition of term The term thermal shock is used to describe the fast, sudden change of temperature in a material. This leads to tension both on the part surface and over the cross-section, particularly where glass suddenly changes from hot to cold...

...Technical Information Troubleshooting Hella Dyna Beam bend lighting Troubleshooting In the case of Dyna Beam bend lighting headlight se ts (Golf V, Astra H, Ford Focus I), a control lamp is used which indicates possible malfunction of the system to the driver. After switchi...

...Xenon ballast 1-1 Technical Information Xenon ballast 5DV 007 760 -651 General This ballast is available as a spare part for different vehicles (an exact vehicle identification can be found in our Hella lighting cataloque). This allows you to buy this spare part from the...

...Xenon-Lamps If a gas is used instead of a tungsten wire, as in a normal bulb, through which the current flows, we are talking about a gas discharge lamp. This type of lamp is filled with gas and metal dust. The mixture, when electrical current flows through the lamp, illuminat...

...\ Transformer 1-1 Technical Information Transformer Safety note for Xenon transformer 3. generation Incorrect handling of Xenon Headlamps with 3 rd generation electronics can lead to a voltage spike or even electric shock . When the transformer (12 or 2 4V) is switc...



...[Previous 10 pages] ... 135 | 136 | 137 | 138 | 139 | 140 | 141 | 142 | 143 | 144 ...[Next 10 of 452 pages] ...
footerlogo
popup