menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4511 results

...Ford Focus Model: C-Max 1.6 16 V TDCI Model year: from 2006 onwards All models with ABS/ESP ABS warning light illuminates Error code: C1288 Pressure sensor Current circuit faulty If the above error is discovered together with an illuminated ABS warning light, this may be due to the...

...Corrosion had really taken hold and the brake discs and pads were good for nothing but the bin One of many vehicles that had seen little use due to the Covid lockdown, this 2005 Ford Focus 1.6 had been left standing for an extended period of time. It’s owner had been furloughed for th...

...Ford Focus, build till 08/2000 Blower or blower switch without or sometimes without function. If, on this vehicle the problem is that the blower, blower switch does not function or a smell of melting plastic is present, a possible cause could be a bad electrical contact on the connector...

...Ford Focus - Bonnet release trouble The bonnet on this 2006 Ford Focus 1.6 had very likely not been opened since the last time the Focus was in my workshop, and that was around a year ago. A quick call to the owner confirmed my suspicions, and told me he had not had a need to open it, all...

...Focus - Glow plug issue Steve Rothwell Tales from the workshop This 2009 Ford Focus 1.8 diesel, had been starting without issue all through the coldest weather. When the mornings were becoming a little milder, things were taking a downturn. The engine needed cranking a lot more than it u...

...Ford Focus (DAW, DBW, DNW, DFW) Model year: 10.1998 to 13.01.1999 Heater noises Whistling noises from the heater area may occur on the above-mentioned vehicles. One possible cause is a gap in the area of the heater box. This gap arises due to production tolerances. At blower level...

...Ford Focus High and low pressure service connection In the case of the above-mentioned vehicles, the service connections for the air conditioning system are directly next to the condenser (Fig. 1) and on the accumulator. This latter connection can only be reached, however, if the front...

...Ford Focus, petrol and diesel engine Build year 08.98 – 02.99 Inaccurate fuel gauge and on-board computer. If on this vehicle the fault is that the fuel gauge and the re-fuelling distance display in the on-board computer are inaccurate, a possible cause could be a faulty sensing unit....

...Ford Focus - Internal EGR Failure The pin between the motor and the valve had broken Quite a number of diesel engine problems can be attributed to EGR related failure. With more complex EGR systems, this can result in a more expensive outcome to resolve the problem. This 2006 Ford...

...Tales from the workshop Steve Rothwell One of the tasks which we always carry out during an annual service, is the removal of the wheels. This is done for two reasons. The first is to have a good look at the brakes and the second is to ensure that the wheel will actually come off. This...



...[Previous 10 pages] ... 142 | 143 | 144 | 145 | 146 | 147 | 148 | 149 | 150 | 151 ...[Next 10 of 452 pages] ...
footerlogo
popup