menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4511 results

...Ford Focus Model year: 2004–2011 Motor 1.6 16 V (HXDA) Loss of engine power. Malfunction indicator light comes on. If a customer complains about the above problem, this could be caused by a throttle valve sensor. The following error codes can be stored in the 'engine' system's even...

...Ford Focus Model year 08/1998 to 09/2000 All models with central locking and radio remote control Low range or poor function of the remote control. If there are complaints with these vehicles that the radio remote control has a low range or does not work at all on occasions, one possibl...

...Steve Rothweel Workshop Tales Tales from the workshop Ford Focus - Pungent diesel smell The body of the fuel injector was leaking diesel The smell of diesel is not on the top of my list of favourite scents. When diesel leaks onto a hot engine, and starts to evaporate, the resultin...

...Ford Focus Model year: 01.06.2006 to 25.01.2007 Engine: 1.6 + 1.8 + 2.0 litre TDCi Failure of the radiator fan module In the case of the above-mentioned vehicles that we re built in the Saarlouis, Valencia and St. Petersburg plants, the radiator fan can become overheated and/or fail...

...Ford Focus Model year: until June 2000 With air-conditioning system Strong development of odour, fogged windows Strong, musty odour development and/or fogged windows can occur in the case of the above-mentioned vehicles. This is often caused by moisture residues in the evaporator b...

...Ford Focus All models from 08.1998 – 04.1999 Water penetration in the front footwell. If there are complaints with these vehicles about water penetrating the front footwell, one possible cause is poor sealing between the cowl grille and the windscreen. This affects the area above the in...

...Ford Focus, build up to and including 15.01.99 Windscreen, Rear window and Side windows steam up fog up. This is due to there being not enough ventilation in the area of the rear bumper. To rectify the problem: To rectify the problem Ford recommend to change the ven...

...Ford Focus With 1.4l / 1.6l Zetec-SE engine Speedometer needle jumps during acceleration. If there are complaints with this vehicle that the speedometer needle jumps during acceleration, this could be caused by the cylinder head temperature sensor cable touching the ignition cable of...

...ContiTech: Expert Tips for Changing Timing Belts • Detailed instruction for Ford Focus 2.0-liter 16V with engine code EDDB, EDDC, EDDD • ContiTech shows how to avoid errors when changing belts Significant errors are frequently committed when changing the timing belt. To ensure that...

...ContiTech: Expert Tips for Changing Timing Belts • Detailed instruction for Ford Focus C-Max 1.6-liter Ti with engine code HXDA, SIDA Significant errors are frequently committed when changing the timing belt. To ensure that the belt change operation goes smoothly, the ContiTech Power...



...[Previous 10 pages] ... 143 | 144 | 145 | 146 | 147 | 148 | 149 | 150 | 151 | 152 ...[Next 10 of 452 pages] ...
footerlogo
popup