menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4511 results

...Mitsubishi/Fuso Canter TF/TF1 Model year: 2011-09-16 - 2014-12-17 Oil cooler hose On the above vehicles, the oil cooler hoses on the fully automatic direct shift transmission (Duonic transmission) must be checked and, if necessary, replaced. If this is not done, there is a risk of...

  • img
  • Type

    Technical Bulletin

  • Mitsubishi FTO-Galant Idle Speed Control Valve-Stepper Motor

  • Feb 07

  • Blue Print (202) Contact
  • PDF

...INF096 Mitsubishi FTO-Galant Idle Speed Control Valve-Stepper Motor Product Focus –Idle Speed Control Valve (Stepper Motor) ADC47430 Mitsubishi FTO 2.0 & Galant 2.5 V6 models It is our experience that the Idle Speed Control Valve (Stepper Motor) commonly fails on the Imported...

  • img
  • Type

    Technical Bulletin

  • Mitsubishi FTO Crankshaft Pulley Replacement

  • May 07

  • Blue Print (202) Contact
  • PDF

...INF104 Mitsubishi FTO Crankshaft Pulley Replacement ADC46104C Crank Shaft Pulley Subject - Product Information Vehicle – Mitsubishi FTO 2.0 (DE3A) We have been made aware that the Crankshaft pulley fitted on the Import Mitsubishi FTO 2.0 model is prone to partial or full failure du...

  • img
  • Type

    Technical Bulletin

  • Mitsubishi Colt and SMART Forfour Parking Brake Tempoarily Seized

  • Feb 21

  • Blue Print (202) Contact
  • PDF

...Mitsubishi Colt and SMART Forfour Parking Brake Tempoarily Seized Problem After applying the parking brake the rear brake caliper becomes seized in operation, which could take 5-10 minutes to move freely again. This problem can affect either side separately or both sides together....

...We have encountered several cases of flywheel (spigot) bearing failure on some Mitsubishi models. The flywheel should be carefully checked or replaced when installing a new clutch assembly. The following points should be noted during routine clutch replacements: A seized flywheel bearing m...

  • img
  • Type

    Tech Tip

  • Mitsubishi AYC/ACD system

  • Aug 13

  • Blue Print (202) Contact
  • PDF

...Mitsubishi AYC/ACD system Written by Jim gilmour Blue Print’s Technical Consultant. electronic stability programmes by any other name have been around for over a decade and have contributed greatly to vehicle safety. Much has been written about them, and for the most part, their op...

...febi 102440,107345 Timing chain kit To Fit: Mitsubishi Montero, Pajero and Shogun models fitted with 4M41 diesel engine. Problem A rattling noise coming from the engine timing chain area or a broken timing chain. Cause The timing chain tensioner’s wear is accelerated...

...faiauto.comHG1539 vs. HG2258Mitsubishi 4M4# Head Gaskets Similarity in gaskets can easily lead to fitment and performance issues. The two gaskets below are a case in point, both fit Mitsubishi four cylinder common rail 4M4# generation engines. However HG1539 fits the earlier 3.2 (4M41) eng...

...faiauto.comHG2101 uses latest OE modification.Mitsubishi 4D56T 16V Engines Following OE modification, FAI now offers the latest design head gasket for Mitsubishi 4D56T 16V engines. The new design has a corrugated upper surface and smooth profile lower layer, completely matching OE. This g...

...Failure of the idler pulley from CT 941K1 due to overheating Mitsubishi 1.8 GDI, Volvo V40/ S40 1.8 Power Transmission Group Automotive Aftermarket ContiTech Antriebssysteme GmbH Philipsbornstraße 1, 30165 Hanover, Germany Techn. Hotline +49 (0)511 938 -5178 E-mail: frank.wissbroecker...



...[Previous 10 pages] ... 197 | 198 | 199 | 200 | 201 | 202 | 203 | 204 | 205 | 206 ...[Next 10 of 452 pages] ...
footerlogo
popup