4511 results

• 
• Type

  Tech Tip

• Mazda 5 DPF issue, Jim investigates...

• Feb 13

• Blue Print (202) Contact
• 

...Jim investigates... Mazda 5 DPF issue Written by Jim gilmour Blue Print’s Technical Consultant. Part of my job is to support customers who have bought a blue Print g-Scan and there’s nothing better than working through a real life situation to really get to grips with it. on one vi...

• 
• Type

  Technical Bulletin

• Mazda 6 (GH) - Engine will not start

• Jul 15

• Hella Ireland (1757)
• 

...2015 Mazda 6 (GH) Model year: 2008-2012 Engine will not start If the engine in the above vehicle will not start and the display remains dark, the reason may be a faulty earth connection (see marking, image 1). It is possible that the connection to the earth pin was not secured pro...

• 
• Type

  Technical Bulletin

• Mazda 6 - Compressor malfunction

• Aug 16

• Hella Ireland (1757)
• 

...Mazda 6 (GG/GY) Model year: 2002 - 2008 Engine: 2.0 Di Compressor malfunction If the compressor in one of the vehicles mentioned above malfunctions, the power supply to the magnetic clutch should be checked. The electrical cable for the magnetic clutch power supply (+) is routed to...

• 
• Type

  Technical Bulletin

• Mazda 6 - Lighting up of the engine warning light

• Aug 14

• Hella Ireland (1757)
• 

...Mazda Mazda 6 Model year: 2007 – 2012 All models Lighting up of the engine warning light. If complaints are made about the above-mentioned error and the engine goes into limp-home mode, the following fault codes could also be stored in the engine control unit. Fault code: - P0140...

• 
• Type

  Technical Bulletin

• Mazda 6 Boot cover

• Sep 12

• Blue Print (202) Contact
• 

...Mazda 6 Estate Luggage Cover Repair Kit Applicable References: ADM58067 Applications: Mazda 6 Estate 2002>2008 The retracting mechanism on the Mazda 6 estate luggage cover commonly fails, resulting in a cover that no longer returns back into its housing. The failing component is a pl...

• 
• Type

  Installation Instructions

• Mazda 6, 323, 626, Premacy Rear Brake Caliper Fitment Guide

• Nov 01

• Blue Print (202) Contact
• 

...Blue Print brake calipers are supplied pre-set to fit with new brake pads and discs without adjustment. If disc or pad wear has taken place (or the piston is retracted during fitment), MANUALLY ADJUST THE PISTON TO WITHIN 1MM OF THE PADS. If the piston is forced to adjust further than 1mm...

• 
• Type

  Technical Bulletin

• Mazda 626 IV - Leaking condenser

• Aug 03

• Hella Ireland (1757)
• 

...Mazda 626 IV (GE) Build year 1991-1998 with factory installed air-conditioning Leaking condenser On some of the above -mentioned vehicles a leakage on the condenser can occur. Often the leak is in the lower area. If a refrigerant loss is established, it`s recommended to spray this are...

• 
• Type

  Technical Bulletin

• Mazda 626 IV - Air-conditioning switch but no air-conditioning

• Jun 04

• Hella Ireland (1757)
• 

...Mazda 626 IV (GE) Model year 1991 - 1998 With factory-fitted air conditioning system Air conditioning switch but no air conditioning system Since there is often confusion here, it must be stated that vehicles without an air conditioning system can have the same switch. The "air condit...

• 
• Type

  Technical Bulletin

• Mazda 626 V - High-pressure service connection

• Aug 04

• Hella Ireland (1757)
• 

...Mazda 626 V (GF/GW) Engine: 2.0i 85KW High-pressure service connection The high-pressure service connection is attached to the filter/dryer of the above-mentioned vehicles. To save searching, please proceed as follows: • Remove the fixing plugs (Figur e 1, arrow) of the plastic cov...

• 
• Type

  Technical Bulletin

• Mazda and Ford Timing Alignment Pin Set ADM55501

• Mar 11

• Blue Print (202) Contact
• 

...Product Information: ADM55501 Timing Alignment Pin Set Applications: Multiple Mazda and Ford models fitted with 1.4TDCi and 1.6TDCi engines Blue Print’s ‘Timing Alignment Pin Set’ ADM55501 is required to allow correct  engine timing alignment which is vital when...