4511 results

• 
• Type

  Technical Bulletin

• Idler for Fiat,/Opel 1.9/2.0 Diesel

• Jul 15

• Gates (127) Contact
• 

...The idler T42140 ( Fig.1 and Fig.2) is used in many engines but the threaded engine installation hole may differ in size. The Gates idler is supplied with a M8 bolt that has a 10mm shaft and a washer. Some applications require an M10 . If so the original bolt can be re -used...

• 
• Type

  Technical Bulletin

• Hyundai, Kia 1.5, 2.0 & 2.2 D Tenioner

• Jul 15

• Gates (127) Contact
• 

...E2/TT005 v1.0 › 12/2014 › Pag. 1/1 Tensioner T43133 has a very particular installation process , described below . Removing the load pin too early influences the working area of the tensioner dramatically and leads to premature failure with engine damage as a consequence. T431...

• 
• Type

  Technical Bulletin

• VAG 1.6 Diesel: CAYB & CAYC + Air-conditioning

• Jul 15

• Gates (127) Contact
• 

...E2/TT006 v1.0 › 12 /2014 › Pag. 1/1 Changes to VAG 1.6 diesel CAYB & CAYC engines affect models equipped with air conditioning , from October 2009 on ward. Classic Multi- Ribbed V-belts replace earlier elastic belts. 6PK1140SF – 6PK1070+T38427 VAG 1.6 Diesel: CAYB & CAYC +...

• 
• Type

  Technical Bulletin

• 6PK1249SF – 6P K1305 +T38318

• Jul 15

• Gates (127) Contact
• 

...E2/TT00 7 v1.0 › 12 /2014 › Pag. 1/1 The 6PK1249SF is a ' stretch' belt used by Ford and Volvo for various petrol and bi -fuel engines (see catalogue for details ). It replaced a standard multi -ribbed belt with tensioner combination for cars manufactured from November 200...

• 
• Type

  Technical Bulletin

• Opel 1.4 Petrol OAPs

• Jul 15

• Gates (127) Contact
• 

...E2/TT00 9 v1.0 › 12 /2014 › Pag. 1/1 On certain Opel/Vauxhall engines ( codes: A14NEL, A14NET, A14XEL, A14XER) the belts may have 5 or 6 ribs while the pulleys may have 5 or 6 grooves . It depends on the manufacturing date of the car . Gates recommends replacement of a 5 groo...

• 
• Type

  Technical Bulletin

• VAG 1.8 Petrol Tensioner

• Jul 15

• Gates (127) Contact
• 

...E2/TT010 v1.0 › 12 /2014 › Pag. 1/1 Tensioners T43016 (Fig. 2) and T43017 (Fig. 1) are used in combination with Timing Belt 5491XS. Although both tensioners look identical at first sight, they are not interchangeable. The difference is to be found in the orientation of the a...

• 
• Type

  Technical Bulletin

• Volvo S40 /V40 Fuel level indicator errors

• Aug 15

• Pierburg (204)
• 

...Volvo S40 /V40 Fuel level indicator errors SI 1569 For technical personnel only! Page 1/2 Tank indicator errors Detached cables due to defective fuel tank ventilation Vehicles: Volvo Vehicle applications S40/V40 1.6i/1.8i/2.0i S40/V40 1.9i/2.0i Turbo Potential complaints: • Tan...

• 
• Type

  Component Description

• JTD Fuel Filter Removal Tool

• Aug 15

• Blue Print (202) Contact
• 

...Blue Print’s Fuel Filter Removal Tool (ADK85502) is an OE developed tool for vehicles fitted with a JTD type engine. It helps make the job of replacing the fuel filter more efficient and more importantly, greatly reduces the risk of damaging the fuel filter housing. Asian and American...

• 
• Type

  Installation Instructions

• MEYLE-HD control arm for BMW applications

• Aug 15

• MEYLE (49)
• 

...MEYLE-HD control arm for BMW applications Learn how to replace the control arm on BMW 5, 6 and 7 Series models in this edition of the "MEYLE Mechanics". Devised by Wulf Gaertner Autoparts AG's engineers, the universally designed MEYLE-HD control arm (wishbone) fits all three BMW Series m...

• 
• Type

  Technical Bulletin

• Peugeot 4007, 407 807 - Starting hard, running poor, engine light on

• Aug 15

• Hella Ireland (1757)
• 

...Peugeot Models: 4007 / 407 / 807 Model year: from 2006 onwards Engine: 2.2 HDI FAP, DW12, Code: 4HX / 4HY Starting behaviour and engine performance insufficient and also engine warning light is on The error codes stated below are stored in the engine control module: - P0087/135 re...