4561 results

• 
• Type

  Installation Instructions

• Installing coolant thermostats correctly

• Jun 13

• MAHLE (151)
• 

...Not fully sealed? Installing coolant thermostats correctly The coolant thermostat performs numerous important functions in a vehicle. As a result, it is advisable to re place the thermostat promptly in the event of a fault. Time and again, thermostats are returned to MAHLE under com...

• 
• Type

  Tech Tip

• LuK Clutch Academy Ford S-Max

• Jun 13

• LuK (132) Contact
• 

...LuK Clutch Academy Ford S-Max The Ford S-Max is the clutch fitters’ dream. With a few pointers from Schaeffler’s Malcolm Short, it should be easy to beat the book time of around five hours. Nothing out of the ordinary is needed to complete the job, the only special tools required are...

• 
• Type

  Tech Tip

• Proper Electrical Tools: Oscilloscope and Breakout Box

• Jun 13

• Ryans Automotive (14)
• 

...Electrical Problems Require Proper Tools As electronics electrical circuits get more advanced, the tools required to diagnose and fix them have also evolved. Brendan Ryan, from A.D.S, explains how to use a few of these tools, that are considered by many, to be as essential as a spanner wh...

• 
• Type

  Tech Tip

• Troubleshooting Guide - Glow Plugs

• Jun 13

• DENSO (4)
• 

...Troubleshooting Guide - Glow Plugs Glow plugs are one of the most familiar diesel parts, but their improved performance and longer life mean you are probably fitting fewer replacements than ever before. Here DENSO technical expert, Alan Povey talks us through some of the most common vis...

• 
• Type

  Installation Instructions

• Installing Rear Brakes - Toyota RAV4 III

• May 13

• Ferodo (22)
• 

...markingBRAKE PADSREMOVAL• Position vehicle onto lift .• Remove rear wheels.• Loosen lower retaining screw between brake caliper and mount.• Turn brake caliper upwards, and remove pads from brake holder.ASSEMBLY• Correctly position brake pads onto brake holder.• Retract pist...

• 
• Type

  Part Info Sheet

• TVD Pulley Kit TIP0028 - 36433

• May 13

• febi (172)
• 

...TVD Crankshaft Pulley Kit febi no. 36433 Repl. No. 0515.V3 S1 (0515V3S1) Fits: Peugeot 407, 4007, 607, 807 / Citroen C Crosser, C5 II/III, C6, C8 2.2 HDi 16V Engines / Mitsubishi Outlander II / Fiat Ulysse II / Ford Mondeo The crankshaft pulley pictured drives the V belt for the ancilla...

• 
• Type

  Technical Bulletin

• Opel Insignia - Poor engine performance, final speed not achieved

• May 13

• Hella Ireland (1757)
• 

...Opel Insignia Model years: 2011 - 2012 With engine: A28NER / A28NET With automatic transmission: AF40 Poor engine performance / Final speed is not achieved In the above vehicles, an improperly tuned engine software may be the cause they are not able to reach their final speed. The...

• 
• Type

  Technical Bulletin

• Mercedes Type: (280 CDI to 350 CDI) - Engine power loss

• May 13

• Hella Ireland (1757)
• 

...Mercedes Benz Type: (280 CDI to 350 CDI) Engine: OM 642 Engine power loss Crankshaft sensor Crankshaft position sensor On vehicles with OM 642 engines, the possibility exists that there is a loss of engine power. The reason for this may be an electrical interruption in the crankshaf...

• 
• Type

  Technical Bulletin

• Opel Zafira A - Instrument display failure, random warning lights

• May 13

• Hella Ireland (1757)
• 

...Opel Zafira A Model years: 2002 to 2005 Fluctuating instrument display. Random illumination of the warning and indicator lights on the dashboard. If there are complaints for these vehicles about the problems mentioned above, a possible cause could be water ingress at the intersect...

• 
• Type

  Technical Bulletin

• VW Crafter - Auxiliary battery not charging

• May 13

• Hella Ireland (1757)
• 

...VW Crafter Model year: 2011 With auxiliary battery Auxiliary battery is not charging In the above vehicles, incorrect coding of the electric system control unit may be the cause that the auxiliary battery is not charging. To remedy this, the electric system control unit mu st be r...