menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4511 results

...CL 010 826491/826497 HEC CLUTCH KITS Vehicles: Ford/Renault Valeo have launched two adaptable kits that will replace the original self adjusting kits technology (SAT). These adaptable kits will be visually different from the original. These adaptable kits are designed to re...

...Difficult gear change and judder/vibration CLUTCH 2017 Part Number: 835035, 826712, 826729 For Vehicle: Audi, Seat, Skoda, VW, 1.9 TDI with a BKC, BLS or BXE engine The vehicles listed above may experience clutch pedal vibrations, difficult gear change or judder during gear change...

...Avoiding clutch pedal vibrations www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CLUTCH 2017 Avoiding clutch pedal vibrations Clutch pedal vibrations can be attributed to a faulty or worn fr...

...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...

...CL 043 Fitment of friction plate in 828118, 837322 & 837394 Vehicles: Citroen C4 Picasso, C5 1.6HDi Peugeot 3008, 5008, 508 1.6HDi Valeo Technical Support receives a number of calls regarding the fitment of the friction plate in clutch kit 828118...

...Some Brake Pads are fi tted with wire clamps on the back plate. The inner (piston side) pads are fi tted with wire clamps. These must be correctly seated into the external groove cut into the piston. This device ensures that the pad remains in contact with the piston at all times and is...

...Correct fi tment of inner and outer pads when fi tted with different size or type of backplate spring. Brake Pads with inner and outer pads are often fi tted with a diff erent size or type of backplate spring. The inner and outer pads are not interchangeable. Care must be taken to ide...

...Ensure the axle is completely clean and slide the disc carefully on to the axle, taking care not to force the bearing inner ring out of alignment If the bearing inner ring has moved outwards, it must be re-aligned with the outer ring before fi tting the retaining nut. Rotate the disc by...

...Electric fuel pumps E1F, E2T and E3T Blocked pre filter SI 1761 Most modern fuel pumps are flushed through with fuel, which lubricates and cools them. If this does not happen to a sufficient extent, e.g. through soiling, there is a risk of "dry running". Fuel pumps in the E1F, E...

...Oil consumption caused by:Distortion of cylinder bores Distor tion of cylinder bores is easy to identif y from individual, bright areas on the cylinder sliding sur face. As a result, piston rings are not able to reliably seal distor ted or deformed cylinder bores to prevent the ingress of...



...[Previous 10 pages] ... 266 | 267 | 268 | 269 | 270 | 271 | 272 | 273 | 274 | 275 ...[Next 10 of 452 pages] ...
footerlogo
popup