4511 results

• 
• Type

  Technical Bulletin

• Current Measurement Tools and Process - Frank Massey

• Mar 19

• Autoinform (109) Contact
• 

...Current measurement tools and process My experiences with current measurement goes all the way back to the dark days of off-car ECU testing, initially relying on load simulation with the ATP network 500 terminal. It became painfully obvious that load simulation could not fully, and accura...

• 
• Type

  Technical Bulletin

• LuK-Clutch-Academy-Fiat-500-Abarth

• Mar 19

• LuK (131) Contact
• 

...LuK-Clutch-Academy-Fiat-500-Abarth REPXPERT's Alistair Mason replaced the clutch in a Fiat 500 Abarth. With the manufacturer recommending that the engine be removed first, Alistair decided that course was traumatic, and more pressingly, it was impossible! So he followed a more conventio...

• 
• Type

  Technical Bulletin

• CAN Bus testing and serial decoding - Practical Pico Webinar

• Mar 19

• PicoScope (102)
• 

...CAN Bus testing and serial decoding - Practical Pico Webinar Barney, Steve and Ben will be answering questions that are asked during and after the "Pico Practical: CAN bus diagnostics and serial data decoding" presentation.  ...

• 
• Type

  Technical Bulletin

• Toyota Multi-Mode Transmission (MMT) Clutch Replacement

• Feb 15

• Blue Print (202) Contact
• 

...Toyota Auris, Aygo, Corolla, Yaris / Citroën C1 / Peugeot 107 – MMT Clutch Replacement GuideApplicable References: ADT330265 / ADT330266 / ADT330274 / ADT330278Applications: Toyota Auris 1.4 & 1.6, Aygo 1.0, Corolla 1.4, Yaris 1.0, 1.3 & 1.4 / Citroën C1 1.0 / Peugeot 107 1.0 1999 201...

• 
• Type

  Technical Bulletin

• When and how to use brake grease

• Apr 19

• Ferodo (22)
• 

...This instructional video looks at the importance of brake grease and how to apply it correctly, with helpful tips from Ferodo....

• 
• Type

  Technical Bulletin

• Correct Brake Pad Shim Fitment

• Apr 19

• Apec Braking (40)
• 

...Issue date: 12th April 2019PAD1835 - Correct Shim Fitment - Ford FiestaInner PadsPlease note the pips on the inner pads Please note that the shim kit makes the inner pad directional and must therefore be fitted so that the disc rotates into the cutaway of the rubber shim.Outer Pads Step 1...

• 
• Type

  Technical Bulletin

• When should brake fluid be changed?

• Apr 19

• Apec Braking (40)
• 

...The recommended intervals for changing brake fl uid vary tremendously depending on the manufacturer. This can be as often as every two years to actually never!For example, Chevrolet calls for a brake fl uid change on most models every 45,000 miles, while Honda states to do it every three y...

• 
• Type

  Technical Bulletin

• Diferences Between Throttle Valves and Regulating Throttles

• Jun 18

• Pierburg (204)
• 

...THROTTLE VALVES AND REGULATING THROTTLESWHAT IS THE DIFFERENCE?In a petrol engine, the throttle valve impacts the quantity of air that is drawn in. More or less fresh air or air-fuel mixture flows into the cylinder according to how open the valve is. The position of the throttle valve dire...

• 
• Type

  Technical Bulletin

• Calliper Slide Seized: Discovery - Bulging Tyre: Galaxy - Topping up Brake Reservoir

• Apr 19

• Autobiz (337)
• 

...Calliper Slide Seized and not Shifting The seized slide would not shift and had caused the noticeable different wear rate of the pads One of the regular problems we encounter, is the sticking of brake calliper slides. The result of this is that we discover one brake pad worn, while the o...

• 
• Type

  Technical Bulletin

• Autodata - Citroen C6 - Increased Engine Idle Speed

• Apr 19

• Autodata (54)
• 

...Citroen C6: Increased engine idle speed Question: We are having trouble diagnosing a fault on a 2007 Citroen C6 2.7 HDi with an increased engine idle speed. The vehicle came in with the engine malfunction indicator lamp (MIL) illuminated and several engine management trouble codes stored....