4511 results

• 
• Type

  Technical Bulletin

• PowerGrip belt/kit installation on Ford Puma 1.7

• Feb 15

• Gates (127) Contact
• 

...F ORD Puma 1.7 Petrol 16V 17HDEY We would like to make you aware of a potential installation issue with the tensioner (Fig. 1) on the synchronous drive (Fig. 2) of this engine. Although this tensioner is automatic , it is not an eccentric tensioner, and it needs a precise setup...

• 
• Type

  Technical Bulletin

• PowerGrip Kit K015563XS Variations

• Jan 07

• Gates (127) Contact
• 

...OPEL / VAUXHALL Astra, Combo, Corsa, Meriva 1.7 Di / DTi (ISUZU) / CDTi Y17DT, Y17DTL, Z17DTH PowerGrip® Kit K015563XS Some time ago we launched our PowerGrip® Kit K015563XS for GM/Isuzu engines Y17DT, Y17DTL and Z17DTH. This kit contains the coil spring tensioner as advised by GM...

• 
• Type

  Technical Bulletin

• PR numbers for VAG vehicles

• Jan 14

• Hella Ireland (1757)
• 

...The significance of the PR numbers in the spare part catalogue Sometimes the identification of spare parts for the brake system is not only made by looking at the chassis number and the vehicle registration date. In such cases the primary option number (the PR number) is also required....

• 
• Type

  Technical Bulletin

• Practical Pico: 8-channel testing with PicoScope

• Aug 19

• PicoScope (102)
• 

...Practical Pico: 8-channel testing with PicoScope Testing quad-cams, immobilisers and hydraulic systems with the 8-channel PicoScope! In this Practical Pico video, Steve, Ben and Barney will show you how to push PicoScope to the max when it is combined with our new PicoScope ...

• 
• Type

  Installation Instructions

• Pre-filled Clutch Hydraulic System - Rover Group

• Jan 13

• Autobiz (337)
• 

...Rover Group 25, 45, 75, 200 / 400 series 1995- Pre-filled Clutch Hydraulic System Concerns; The vehicles above are equipped with a factory filled clutch hydraulic cylinder (CSC). The hydraulic system must be bled through the CSC by forcing fluid through the opened bleed screw on the C...

• 
• Type

  Component Description

• Preheating Relays

• Sep 01

• Hella Ireland (1757)
• 

...Technical Information Preheating relays General Preheating relays provide switching and control of glow plugs. Activation and operation duration are mostly influenced by the position of the ignition switch or activity of the door lock and a temperature sensor. Funct...

• 
• Type

  Technical Bulletin

• Premature Failure of Accessory Drive Belts

• Jan 10

• Gates (127) Contact
• 

...Technical Bulletin 032 Copyright © 2009 Gates Corporation Page 1 of 5 # 032 17/12/2009 GATES REFERENCE : MAKE : MODEL : ENGINE : ENGINE CODE : All V-and Micro-V® XF belts As some accessory drive systems still suffer from premature wear/noise/failure of the belt,...

• 
• Type

  Tech Tip

• Premature starter failure from contamination

• Mar 18

• Autobiz (337)
• 

...Premature starter failure from contamination Contamination from foreign material and fluids can cause damage to the internal parts of a starter, often bringing about an premature failure of the starter. Rotating electrics specialist Rhino Automotive has advice, on what to look out for, to...

• 
• Type

  Installation Instructions

• Press-Fit Ball Joints

• May 12

• First Line (47)
• 

...PRESS-FIT BALL JOINTS ‘Press-Fit’ Ball joints, such as those shown below, rely on an interference fit to retain the joint in the suspension arm during normal vehicle operation. First Line recommend that the new ball joints are pressed into the suspension item WITHOUT the applicat...

• 
• Type

  Technical Bulletin

• Pressure oil filling on reconditioned engines

• May 17

• Pierburg (204)
• 

...Pressure oil filling on reconditioned engines SI 1639 For technical personnel only! Page 1/2 Pressure oil filling on reconditioned engines Situation: After an engine has been completely overhauled, the plain bearings may be damaged immediately during initial start-up. The rea...