4511 results

• 
• Type

  Technical Bulletin

• Audi A4 front driveshaft inspection & replacement

• Jun 24

• febi (170)
• 

...With so many forces transmitted through a vehicle’s drivetrain, worn or poor-quality components can have a dramatic effect on its occupant’s safety and comfort. A common failure with driveshafts are the rubber boots that protect the constant velocity joints deteriorating and sp...

• 
• Type

  Technical Bulletin

• VAG DQ400E (0DD) Direct-Shift Transmission Oil Replacement

• Jun 24

• febi (170)
• 

...In this video we use high-quality febi lubricants to replace the transmission oil on a Skoda Superb plug-in hybrid equipped with the DQ400e direct-shift transmission, which is also used in many other Volkswagen Group plug-in hybrid vehicles. febi lubricants offer optimum friction behaviour...

• 
• Type

  Tech Tip

• Timing Chains and Proper Lubrication

• Oct 12

• FAI (38)
• 

...Timing Chains and Proper Lubrication Timing chains have made a come back and are now common on new vehicles. While they are very strong and fit for purpose, they do require proper oil lubrication, as FAI Autoparts points out. Timing chains have become the preferred choice for engine manuf...

• 
• Type

  Tech Tip

• Timing Chain Replacement Best Practice

• Sep 17

• FAI (38)
• 

...Timing Chain Replacement Best Practice FAI To install a replacement timing chain kit is a costly process, which should not be undertaken as a simple remove and replace,. There must be a methodical approach to identify the cause of the original failure. Not to do so will only cause a repe...

• 
• Type

  Technical Bulletin

• Water Pump with Electro-Magnetic Clutch

• Apr 16

• FAI (38)
• 

...faiauto.com Factory guide and introduction.WP6558- This water pump has two pulleys: Master Pulley and Slave Pulley.- The Master Pulley is fixed on the shaft by screws and when the Master Pulley rotates, the impeller rotates in turn.- Between Master Pulley and Slave Pulley, there is an 'Int...

• 
• Type

  Technical Bulletin

• Diagnosis of worn wheel end bearings

• May 17

• FAI (38)
• 

...Wheel end bearings SuspensionAxial rods Steering Rack Gaiter KitsStabilizer Link BarsRubber-to-Metal Track control arms General informationWheel end bearingsDrag Links and Centre ArmsTie rod ends V-Torque rodsBall jointRepair kitsTie rod assemblies Expert tipsSteeringWishboneLight Vehicle...

• 
• Type

  Technical Bulletin

• Head Surface Finish

• Apr 18

• FAI (38)
• 

...faiauto.com Before fitting a replacement head gasket Head Surface Finish Ensure the cylinder head and engine block surfaces have been checked, ensuring level sealing surfaces.Maximum values: Roughness...

• 
• Type

  Technical Bulletin

• Bolt Tightening Sequence - Crankshaft Seal

• May 18

• FAI (38)
• 

...faiauto.comOS1002R Bolt Tightening Sequence Best Availability. Best Value. Best Quality. Best Service. Technical Bulletin May 2018+44 (0) 1525 351800 TB0012...

• 
• Type

  Technical Bulletin

• Damper Pulley Bolt Torque Settings - Ford 2.2 & 2.4 Duratorq

• May 18

• FAI (38)
• 

...faiauto.comFord 2.2 & 2.4 Duratorq Bolt Torque Settings CAUTION: Damper pulley retaining bolts MUST only be used 3 times Best Practice:After installation, stamp the damper pulley bolt head with a centre punch to indicate usage. The bolts should be tightened in 2 stages Stage 1: 30 Nm Stage...

• 
• Type

  Technical Bulletin

• Automatic Belt Tensioner Variants on Ford Petrol Engines

• May 18

• FAI (38)
• 

...faiauto.comT9315: One Tensioner, two designs.Automatic Belt TensionerContitech V55226INA 531058610QH QTT948Febi 11291Gates T43127SKF VKM14222NTN GT352.18T9315 has been in FAI's offer for many years as it is used in TBK104 and fits a large range of Ford petrol engines. The tensioner which...