menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4511 results

...Conductor Plate Kit for automatic transmissions febi no. 36542 Repl. no. 140 270 11 61 S1 (1402701161S1) Fits all Mercedes-Benz 5-gear automatic transmissions. The sensors of the conductor plate stick together due to deposits in the automatic transmission fluid. This results in gear cha...

...The axle mounting bush for rear axle beams on the Renault Kangoo I with torsion bar suspension is not available individually from the manufacturer. In the past, if the bearing failed, it always had to be replaced together with the complete rocker bar (Fig. 1) because it could only be purch...

  • img
  • Type

    Installation Instructions

  • Diesel Particulate Filters (DPF) Diagnosis Guide

  • Sep 11

  • Blue Print (202) Contact
  • PDF

...Diagnosis Guide for vehicles fitted with Diesel Particulate Filters (DPF) Disclaimer : Any technical tips are produced in good faith. Blue Print always recommends that vehicle maintenance and diagnostics are only carried out by  suitably experienced people using appropriate tools in...

  • img
  • Type

    Installation Instructions

  • Chrysler PT Cruiser Thermostat Housing Replacement

  • Mar 11

  • Blue Print (202) Contact
  • PDF

...Chrysler PT Cruiser Thermostat Housing Replacement Applicable References: ADA109212 Applications: Chrysler PT Cruiser 2.0i, 2.4i 2000> The thermostat housing/coolant filler neck is a plastic moulded item (located towards the OSF of the engine compartment) that can often warp or crack...

  • img
  • Type

    Installation Instructions

  • Glow Plug Aperature Cleaner ADG05511

  • Mar 13

  • Blue Print (202) Contact
  • Video

...A video showing how to use Blue Print's glow plug aperature cleaner to remove seized glow plugs. Glow plugs can be seized due to carbon buildup build up build-up. The kit has a guide bush, a selection of thread sizes and a reamer. Glow plug aperture cleaner to suit engines using M10...

...tarting with the auto adjust mechanism fitted in the spring retention clip (middle of chassis sub- 1. frame) – route cable upwards, towards firewall - Slide the cable end fitting up through the Firewall towards the clutch pedal lever and push the Firewall Grommet “home”. PLEASE...

...First Line the well known and respected aftermarket distributor introduces BKB3252 to its market leading cable range as a modified Brake cable application for the Vauxhall Vivaro, Renault Trafic & Nissan Primastar. MY 2001 - 2010 With a newly modified fixing to alleviate the problem of th...

...PRESS-FIT BALL JOINTS ‘Press-Fit’ Ball joints, such as those shown below, rely on an interference fit to retain the joint in the suspension arm during normal vehicle operation. First Line recommend that the new ball joints are pressed into the suspension item WITHOUT the applicat...

...1. Fitting the new cable is essentially the reverse of the removal but care MUST be taken when fitting the new cable as the inner cable be strained and bent past its maximum permissible bend radius. The new cable is fitted as follows; 2. Loosely feed the cable through the bulkhead towards...

...Citroen / Fiat / Peugeot C4, C5, C8, Synergie, Xsara / Ulysse / 206,307, 406, 407, 607, 806, 807 1.8i, 2.0i, 2.2i May 2012 IMPELLOR SIZE VARIATIONS There are 2 designs of Water Pump available for the vehicles listed above. FWP1937 incorporates an impellor with a 61mm diameter. Fit...



...[Previous 10 pages] ... 410 | 411 | 412 | 413 | 414 | 415 | 416 | 417 | 418 | 419 ...[Next 10 of 452 pages] ...
footerlogo
popup