4386 results

• 
• Type

  Technical Bulletin

• MAZDA 3 - Heater Panel Problems

• Sep 20

• Autobiz (342)
• 

...Automatic climate control means that the system can be set to a given temperature and forgotten. On this 2005 Mazda3, it was designed to be set at a comfortable temperature and then left to ensure the interior of the vehicle remained at the selected steady temperature. The system on this m...

• 
• Type

  Technical Bulletin

• Kia/Hyundai Timing Belt Tensioner Installation

• Aug 20

• Blue Print (202) Contact
• 

...Kia Hyundai timing belt tensioner Problem This timing belt tensioner needs to be set correctly during the installation process. If this is not followed, this can cause the timing belt system to fail. Cause Removing the load pin too early influences the operation of the tensione...

• 
• Type

  Technical Bulletin

• Picoscope - Current clamp settings explained

• Aug 20

• PicoScope (102)
• 

...Current clamp settings explained Phil Rutt is explaining the current clamps settings for our current clamps. Oscilloscope...

• 
• Type

  Technical Bulletin

• Diesel injection pump drive on Ford 1.8 TDCi Lynx Engines

• Aug 20

• febi (170)
• 

...Diesel injection pump drive Various Ford models fitted with the 1.8 lynx diesel engine (up to year of construction 2008), the crankshaft drives the injection pump via a chain. During any replacement, it is advisable to replace all necessary parts included in the febi chain kit 46390....

• 
• Type

  Technical Bulletin

• Problems after Installing Intake Manifold Servo Motor

• Aug 20

• Pierburg (206)
• 

...INTAKE MANIFOLD SERVO MOTOR:PROBLEMS AFTER INSTALLATION Potential complaints:• Repeated malfunctions following installation of a new servo motor• Fluctuations in speed and jerking• Diagnostic trouble codes P1018, P208, P2011, P3135 DO NOT FORGET TEACHING-IN! Electric servo motors (01...

• 
• Type

  Technical Bulletin

• Ensuring correct A/C compressor oil filling quantities

• Aug 20

• MAHLE (145)
• 

...Technical Messenger Issue 03/2020 When replacing an air conditioning compressor, there are some important points you need to take into account to prevent direct failure of the new compressor and consequential damage to the air conditioning circuit. Flushing The system must be thoroughly f...

• 
• Type

  Technical Bulletin

• Finding the Cause of a Cabin Vibration

• Jul 20

• PicoScope (102)
• 

...Finding the cause of a cabin vibration with the PicoScope function generator Steve Smith is showing how he used the function generator in the NVH software to find the cause of a vibration in his car, which had been bothering him for a long time....

• 
• Type

  Technical Bulletin

• Attenuators: Then and now

• Jul 20

• PicoScope (102)
• 

...Attenuators: Then and now Did you buy a new PicoScope 4225A or 4425A and couldn't find an attenuator in your kit? Have you seen the attenuator but don't know why or how to use them? In this video, Phil Rutt tells us why and how we need to use attenuators with the Automotive PicoSc...

• 
• Type

  Tech Tip

• Blue Print Clutch Clinic - BMW Mini

• Jul 20

• Blue Print (202) Contact
• 

...Clutch Clinic BMW Mini After getting the vehicle into the workshop and onto the ramp, the bonnet was opened, and the battery was dis-connected. The battery is located in front of the bulkhead under an access panel below the windscreen. Working from the top, the coolant expansion tank wa...

• 
• Type

  Technical Bulletin

• Fuel Filter Removal Tool

• Jul 20

• Blue Print (202) Contact
• 

...Technical data can be subject to change PROTIPSFuel Filter Removal ToolProblemUnable to remove the fuel filter housing in order to service the filter without damaging the housing.CauseThe housing is made from plastic and is designed with fins to locate the special tool.SolutionWhen replaci...