menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

3584 PDF Files Listed

...Ford Ka, Fiesta Model year ´96 Ford Puma up to 09.99, design code XJ Blower motor does not function in the switch positions 1, 2 or 3. Noticeable development of smell and smoke. If there are complaints about the above-mentioned points, the resistor in the blower motor could be the ca...

...Ford Ka with ABS built since 09/96 Problems with the radio when the ignition is switched on If there are complaints with these vehicles that disturbing background noise is produced by the radio when the ignition is switched on, one possible cause is that the ground cable is too long. Th...

...Code: BETBBHS1Pages: 1 of 1 Ford KA Front Brake Hoses Ford KA Front Brake Hoses\2BH778002Fro\f Supp\by M10 Loose Gro\f\fet / Spri\2ng To Ca\biper M10Overa\b\b Length 535\f\fBH778622Fro\f Supp\by M10 Fixed Gro\f\fet / Spri\2ng To Ca\biper M10Overa\b\b Length 530\f\fBH778623Fro\f Supp...

...Bought for a snip and advertised by a local dealer as a part exchange bargain, this little 2000 Ford Ka had given the owner six months of trouble free motoring, so at this point he was happy that he had got his money’s worth out of the motor. He was slightly less pleased when he heard...

...Ford Ka, from model year 01.09.1996 Ford Fiesta, from model year 08.1995 to 09.2001, all with 1.3l Endura E engine Increased idling speed when changing gear If there are complaints about t he above fault, the cause could be a defective throttle valve sensor connector. This fault caus...

...Ford Ka from model year 1998 with 1.3 l engine Increased idling speed when changing gear. If there are complaints with this vehicle that the engine runs at increased speed during gear changing, one possible cause is a poor signal from the throttle valve sensor. The signal is corrupted b...

...Ford Ka build year up to 05/1999, Power locking system Power locking system malfunction or functionless If a malfunction or a functionless power locking system is experienced, corrosion or faulty pins in the connectors between the doors and the front pillar could be the cause...

...FORD Ka, model years 1996-2008 Engine: 1.3L and 1.6L Duratec-8V Street ka, model years starting 2003 Engine: 1.6L Duratec-8V Fiesta, model years 2001-2008 Engine: 1.3L Duratec-8V Motor control light is lit Error code: P0030, P0031, P0032, P0053, P0130, P0131, P0132, P0133, P0134 Pro...

...Ford Ka 11.04.01 up to 10.07.01 A/C Failure Failure of the A/C through leakage from the filter drier. If the problem is a lack of cooling performance or even complete failure of the A/C system, then this could be due to the following cause:- A leakage in the area of the stud bolt, on th...

...Ford Ka Model year 08/1996 – 01/2000 Central locking failure. If there are complaints with these vehicles that the central locking system fails or malfunctions, one possible cause is water ingress. The door cable loom suffers damage due to water ingress in the area of the left-hand ex...



...[Previous 10 pages] ... 226 | 227 | 228 | 229 | 230 | 231 | 232 | 233 | 234 | 235...[Next 10 of 359 pages] ...
footerlogo
popup