menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

3584 PDF Files Listed

...Ford Focus High and low pressure service connection In the case of the above-mentioned vehicles, the service connections for the air conditioning system are directly next to the condenser (Fig. 1) and on the accumulator. This latter connection can only be reached, however, if the front...

...Ford Focus (DAW, DBW, DNW, DFW) Model year: 10.1998 to 13.01.1999 Heater noises Whistling noises from the heater area may occur on the above-mentioned vehicles. One possible cause is a gap in the area of the heater box. This gap arises due to production tolerances. At blower level...

...Focus - Glow plug issue Steve Rothwell Tales from the workshop This 2009 Ford Focus 1.8 diesel, had been starting without issue all through the coldest weather. When the mornings were becoming a little milder, things were taking a downturn. The engine needed cranking a lot more than it u...

...Ford Focus - Bonnet release trouble The bonnet on this 2006 Ford Focus 1.6 had very likely not been opened since the last time the Focus was in my workshop, and that was around a year ago. A quick call to the owner confirmed my suspicions, and told me he had not had a need to open it, all...

...Ford Focus, build till 08/2000 Blower or blower switch without or sometimes without function. If, on this vehicle the problem is that the blower, blower switch does not function or a smell of melting plastic is present, a possible cause could be a bad electrical contact on the connector...

...Corrosion had really taken hold and the brake discs and pads were good for nothing but the bin One of many vehicles that had seen little use due to the Covid lockdown, this 2005 Ford Focus 1.6 had been left standing for an extended period of time. It’s owner had been furloughed for th...

...Ford Focus Model: C-Max 1.6 16 V TDCI Model year: from 2006 onwards All models with ABS/ESP ABS warning light illuminates Error code: C1288 Pressure sensor Current circuit faulty If the above error is discovered together with an illuminated ABS warning light, this may be due to the...

...Significant errors are frequently committed when changing the timing belt. ContiTech Power Transmission Group provides fitters a step-by-step explanation of how to change the belt correctly in a Ford Focus 2.0-liter 16 V with engine code EDDB, EDDC, EDDD. The manufacturer recommends ins...

...Ford Focus build year till 12.07.1999 Moisture in the headlamp Misted headlamps due to broken lens. If the headlamp is misting badly, this can be due to a broken lens. The cause of this is pressure on the headlamp, due to the mounting. In this case the faulty headlamp must be replac...

...Ford Focus, built up to 04/2001 All models Number plate lights functionless or corroded. If the number plate light does not illuminate or is corroded, a possible cause is water ingress via the lamp housing and the seal of the trunk door handle. To rectify the problem the number plate l...



...[Previous 10 pages] ... 231 | 232 | 233 | 234 | 235 | 236 | 237 | 238 | 239 | 240...[Next 10 of 359 pages] ...
footerlogo
popup