Search 4,561 docs, articles & videos from the world’s leading Automotive part manufacturers
3320 PDF Files Listed
-
-
Tech Tip
- ABS and ASB Systems
-
May 12
- First Line (47)
-
...ABS and ASB Systems Introduction Since the advent of the SNR-patented Active Sensor Bearing (or ASB®) system in 1997, there has been confusion over the differences between the meanings of ABS and ASB. ABS stands for Anti-Lock Braking system and simply indicates that a vehicle has...
-
-
Technical Bulletin
- Correct installation of type 2.1 Bearings
-
May 12
- First Line (47)
-
...Whilst the Type 2 bearing (single flange hub fig 1) has been in use for some time now, a newer version has become increasingly common in the market place. This is the Type 2.1 bearing (as shown in fig 2). Where this type of bearing differs is that the wheel flange is integral with the inne...
-
-
Technical Bulletin
- PSA Frip Bearing Tightening Torque
-
May 12
- First Line (47)
-
...PSA Frip Bearing Tightening Torque Front anti-roll bar rod Pivot support Pivot upper ball joint nut Pivot upper ball joint nut Pivot support Lower suspension arm Pivot support Front anti-roll bar rod Front anti-roll bar Tightening torque 20.5 daNm Front Pivot lower ball joint Pivot...
-
-
Technical Bulletin
- Wishbone Ford Sport KA 1.6i 2003-2009
-
May 12
- First Line (47)
-
...vehicles with Power Steering. The correct wishbones for this application are FCA6002 and FCA6003. Wishbones FCA6565 and FCA6566 are for use only on non-power steering versions. Whilst the wishbones look similar to the naked eye, there are dimensional differences which will have a radical...
-
-
Technical Bulletin
- Ball Joint Citroen, Fiat, Peugeot
-
May 12
- First Line (47)
-
...CITROËN PEUGEOT 000114 Citroen / Fiat / Peugeot C4, C5, C8, Synergie, Xsara / Ulysse / 206,307, 406, 407, 607, 806, 807 1.8i, 2.0i, 2.2i C5 2009 on / C6 2005 on 407 - 2004 on May 2012 www.firstline.co.uk Technical informaTion BESSEMER CLOSE, BICESTER, OX26 6QE TEL: 01869 24...
-
-
Installation Instructions
- Press-Fit Ball Joints
-
May 12
- First Line (47)
-
...PRESS-FIT BALL JOINTS ‘Press-Fit’ Ball joints, such as those shown below, rely on an interference fit to retain the joint in the suspension arm during normal vehicle operation. First Line recommend that the new ball joints are pressed into the suspension item WITHOUT the applicat...
-
-
Technical Bulletin
- BMW 3 Series 90-2000 (E36) Ball Joints
-
May 12
- First Line (47)
-
...BMW 3 Series 90-2000 (E36) Ball Joints FBJ5434 Heavy Duty Version Replacement heavy duty lower ball joint for BMW E36 models. Following concerns about the service life surrounding this application, FIRST LINE has introduced a ‘Heavy Duty’ version of FBJ5434 which features...
-
-
Technical Bulletin
- Axle Beam Bushes: A3, Leon, Toledo, Octavia, Beetle, Bora & Golf IV
-
May 12
- First Line (47)
-
...Axle Beam Bushes VAG Group Audi A3, Seat Leon / Toledo, Skoda Octavia, Volkswagen Beetle / Bora / Golf IV FSK6066 VAG rear axle beam bushes SPECIAL INSTRUCTIONS & FITTING TIPS The bush originally fitted by OE was manufactured with a metal casing. Replacement bushes have subsequentl...
-
-
Technical Bulletin
- Ford Mondeo Mk3 Subframe Bushes
-
May 12
- First Line (47)
-
...FSK6410 Ford Mondeo subframe bushes SPECIAL & FITTING TIPS Thoroughly clean the mounting holes in the subframe prior to installation of the new bushes. Apply Loctite270 © to the outer circumference of the bush and ensure that it Apply Loctite270 © to the outer circumference of the bush...
-
-
Technical Bulletin
- Auto Adjust Clutch Cable Issues Rover 200, 400, Mini, Maestro & Montego
-
May 12
- First Line (47)
-
...Auto Adjust Clutch Cable Issues Rover 200, 400, Mini, Maestro & Montego Concerns Clutch engagement whilst pedal is still very close to floor and also a common cause of slip/premature wear to the driven plate facings. This can be due to failing action of the auto-adjust mechanism. Fittin...
