menu

Search 4,561 docs, articles & videos from the world’s leading Automotive part manufacturers

  

3320 PDF Files Listed

...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...

...Semi Automatic and Automatic gearbox technology Identifying which type of gearbox used to be pretty simple... a Manual or an Automatic. With technology evolving year on year, identification has become a little more complicated. Manual gearboxes have evolved too but the differences are few...

...Friction plate side to be mounted gearbox side Friction plate side to be mounted flywheel side Shocks on the starter body Magnets RE 003 Shocks during the mounting of starter Vehicles: All Vehicles There must not be heavy shocks when mounting a starter or an alternator on the vehicle...

...Difficult gear change and judder/vibration CLUTCH 2017 Part Number: 835035, 826712, 826729 For Vehicle: Audi, Seat, Skoda, VW, 1.9 TDI with a BKC, BLS or BXE engine The vehicles listed above may experience clutch pedal vibrations, difficult gear change or judder during gear change...

...Avoiding clutch pedal vibrations www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CLUTCH 2017 Avoiding clutch pedal vibrations Clutch pedal vibrations can be attributed to a faulty or worn fr...

...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...

...CL 043 Fitment of friction plate in 828118, 837322 & 837394 Vehicles: Citroen C4 Picasso, C5 1.6HDi Peugeot 3008, 5008, 508 1.6HDi Valeo Technical Support receives a number of calls regarding the fitment of the friction plate in clutch kit 828118...

...Some Brake Pads are fi tted with wire clamps on the back plate. The inner (piston side) pads are fi tted with wire clamps. These must be correctly seated into the external groove cut into the piston. This device ensures that the pad remains in contact with the piston at all times and is...

...Correct fi tment of inner and outer pads when fi tted with different size or type of backplate spring. Brake Pads with inner and outer pads are often fi tted with a diff erent size or type of backplate spring. The inner and outer pads are not interchangeable. Care must be taken to ide...

...Ensure the axle is completely clean and slide the disc carefully on to the axle, taking care not to force the bearing inner ring out of alignment If the bearing inner ring has moved outwards, it must be re-aligned with the outer ring before fi tting the retaining nut. Rotate the disc by...



...[Previous 10 pages] ... 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77...[Next 10 of 332 pages] ...
footerlogo
popup