4511 results

• 
• Type

  Installation Instructions

• Installation of pistons - Step by step

• Jan 17

• Pierburg (204)
• 

...Preparation• Prehoning: grain size 150 (material removal of approx. 0.06 mm based on diameter)• Finish honing: grain size 280 (material removal 0.02 mm based on diameter)• Plateauhoning:grainsize400–600(removeprofilepeaks inafewstro...

• 
• Type

  Technical Bulletin

• Piston rings - Function and design

• Jan 17

• Pierburg (204)
• 

...Piston ringsFunction and designMaintenance faultsDirt in the intake airDir t that reaches the combustion chamber settles in the ring grooves where it causes abrasive wear in the ring grooves and at the piston ring flanks. This results in excessive ring height clearance and consequently to...

• 
• Type

  Technical Bulletin

• Peugeot 807/Citroën C8 Timing Belt water ingress installation tip

• Jan 17

• Contitech (157)
• 

...Installation tip for timing belt kits CT1037K2 and CT1037WP1 for various Peugeot 807 and Citroën C8 2.2 HDI diesel engines Problem: Rainwater runs into the timing belt drive and causes corrosion and icing, resulting, in the worst-case scenario, in engine damage. Cause: The drainage...

• 
• Type

  Technical Bulletin

• Volvo XC90/S90/V90 - Condensation in vehicle interior

• Jan 17

• Hella Ireland (1757)
• 

...Volvo XC90/S90/V90 Model year: 2016 + 2017 Condensation in vehicle interior In the vehicles listed above, there is a chance of water getting into the interior. Over longer periods of time, this may also lead to malfunctions in the electrical systems. This may be caused by an incorrec...

• 
• Type

  Technical Bulletin

• Brake Fluid

• Jan 17

• Hella Ireland (1757)
• 

...Brake fluid Task Brake systems are complex entities in which many elements must work together perfectly to ensure safe functioning, even in extreme situations. The brake fluid plays a very important role in this, as it transfers the power from the pedals to the brake system by means...

• 
• Type

  Technical Bulletin

• Crankshaft Damper Pulley Mounting Bolts

• Jan 17

• NTN-SNR (73)
• 

...Some new damper pulleys require new bolts. Why replace the bolts? When a damper pulley is fitted and torqued correctly the retaining bolts are put under high stress loads, this stress causes the bolts to stretch and deform. If the old stretched or deformed bolts are re-...

• 
• Type

  Technical Bulletin

• Engine bearings - Handling and function

• Jan 17

• Pierburg (204)
• 

...Information on the product range can be found in our catalogue "Engine Bearings".Or ask your local Motorservice partner. We have also provided a lot more information for you at www.ms-motorservice.com and on our Technipedia at www.technipedia.info.Engine bearingsHandling and funct...

• 
• Type

  Technical Bulletin

• Universal clutch fitting instructions and General safety

• Jan 17

• LuK (131) Contact
• 

...SERVICE INFOTB1244Phone : +44 (0) 1432 264 264*Fax : +44 (0) 1432 375 760E-Mail : hfd-pm@schaeffler.comwww.schaeffler-aftermarket.co.uk* calls from the UK : 08457 001100· For accurate model i nformation plea se s ee LuK cat alogue· Die genaue Fahrzeugzuordnung entnehmen Sie bitte dem LuK...

• 
• Type

  Technical Bulletin

• Mercedes Benz A-Class - ABS/ESP warning light on

• Jan 17

• Hella Ireland (1757)
• 

...Mercedes Benz A-Class Type: 168 All models ABS/ESP warning light lights up Error code C1201/ C1202 Error in braking assistant (BAS) trip switch; signal implausible If the problem mentioned above is detected, this may be caused by the BAS trip switch. A signal evaluation error leads to...

• 
• Type

  Technical Bulletin

• Nissan Micra (K13) - Engine stalls during driving

• Jan 17

• Hella Ireland (1757)
• 

...Nissan Micra (K13)/Note (E12) Year of construction: 07/2015 – 01/2016 Engine: 1.2 DIG-S (HR12DDR) Engine stalls during driving In the vehicles listed above, there have been complaints of the engine stalling during driving and refusing to start again. In this case, the aforemention...