menu

Search 4,572 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4563 results

...MCC Smart Bulb replacement To replace the position light and direction indicator bulbs, the right or left cover respectively has to be removed first (Photo 1, Item A). To do this, turn the locking mechanism using a slot screwdriver (Photo 1, Item B). On the left-hand side, the air intake...

...VW Golf 3 With central locking Doors suddenly lock automatically In the case of the above-mentioned vehicles, it is possible that the doors could suddenly lock or unlock of their accord. This can even occur when the ignition is switched on, or when driving. Incorrectly functioning cent...

...Daewoo Nubira Model year: 1997 - 1999 ABS - warning lamp illuminates In the case of the above-mentioned vehicles it can occur that the ABS warning light goes on and off when the hand brake is applied. A fault code is not stored in the fault memory. In this case the ground point in the...

...Porsche 911 (996) Carrera Model year: 1999 – 2001 Faulty function / corrosion on the connector of the air conditioning control unit With the above-mentioned vehicles from model year 1999 to model year 2001, chassis numbers : “X”, “Y”, “1” (the\ 8th digit from the right...

...Ford Probe II With 2.5 l 24V or 2.0 l 16V engine Motor stalls and cannot be started again at all or only with great difficulty. If there are complaints with these vehicles that a warm engine stalls and cannot be restarted or only with great difficulty, one possible cause is an interrupt...

...Opel Omega B ABS lamp illuminates, fault code 33 in the ABS control unit If there are complaints with these vehicles that the ABS lamp illuminates and fault code 33 is stored in the control unit, one possible cause is a faulty ground connection. The ground connection of the control unit...

...Opel Vectra B From model year 1996 ABS lamp illuminates, fault code 37 in the control unit. If there are complaints with these vehicles that the ABS warning lamp illuminates and fault 37 is stored in the ABS control unit, a poor ground connection may be the cause. Fault code 37 means ...

...Citroën XM (Y4) Stop light not working/ stop light switch faulty In the case of the above-mentioned vehicles without ABS, a faulty stop light switch can lead to failure of the stop lamps. The stop light switch (photo) is located in a plastic housing mounted on the brake pedal. The upp...

...Rover 45 Condenser fan not working In the case of the above-mentioned vehicles, a non-working condenser fan can be the cause of faults and/or poor air conditioning system cooling performance. It is often established that t he radiator fan works in an uncontrolled manner, with cons tant...

...MCC Smart Starting problems/immobiliser If the above vehicles are not locked when left, the immobiliser is automatically activated after 5 minutes. When entering the vehicle again, it is not possible to start the engine without deactivating the immobiliser. The immobiliser is activate...



...[Previous 10 pages] ... 403 | 404 | 405 | 406 | 407 | 408 | 409 | 410 | 411 | 412 ...[Next 10 of 457 pages] ...
footerlogo
popup