menu

Search 4,514 docs, articles & videos from the world’s leading Automotive part manufacturers

  

3584 PDF Files Listed

...BMW 3 Series (E36) with the engines M43, M44, M52 No temperature regulation possible If there are complaints about the above-mentioned fault, a displaced retaining pin could be the cause. "The heating can't be switched off" or "the heating is always the same temperature" are further co...

...Opel Vectra B Different compressors The Vectra B has various Harrison and Denso compressors fitted. These can be different despite same vehicle types (e.g. belt pulley alignment). To be sure that the ordered part is the right one, order only using the original part number!...

  • img

  • Technical Bulletin

  • VAG 1.8 Petrol Tensioner

  • Jul 15

  • Gates (127) Contact
  • PDF

...Tensioners T43016 (Fig. 2) and T43017 (Fig. 1) are used in combination with Timing Belt 5491XS. Although both tensioners look identical at first sight, they are not interchangeable. The difference is to be found in the orientation of the attacking arm, which differs by 3°. T43016 /...

...VW/Audi/Skoda/Seat 1.8 T/2.0 Timing Belt Guide Changing the CT 909 K5 timing belt kit for VW/Audi/Skoda/Seat 1.8 T/2.0 to the CT 909 K10 (Change from hydraulic tensioning damper to mechanical tensioning pulley) Power Transmission Group Automotive Aftermarket ContiTech Power Transmi...

...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...

...1. Operate the transmission until it is warmed up.2. With the clutch engaged and the trans-mission in neutral, increase the engine speed to approximately 4000 rpm.3. Step on the clutch pedal and shut the engine off at the same time.4. If you hear rattling noises which change as the...

...I. General recommendations 1) Always refer to the vehicle's service manual 2) Prepare the required materials and tools before starting the installation, make sure that they are clean and in good condition. 3) Work in a clean and tidy area. 4) Check the kit number is correct. To avoid damag...

...Cable for camshaft sensor - Mercedes-Benz febi 107574 PROTIPS Cable for camshaft sensor various Mercedes-Benz models Problem The engine management warning lamp is illuminated, with various fault code entries - referring to the oxygen sensors - logged in the engine control unit....

...Headlamp beam setter 1-2 Technical Information Headlamp beam setter An important safety aspect in traffic are correctly adjusted headlamps, to provide good exact illumination of the road, with the lowest possible glare to the oncoming traffic. To adjust the headlamps...

...BMW All models with tilt/slide sunroof Model year 1994 - 2004 Failure of the "tilt function" of the tilt/slide sunroof. If there are complaints with these vehicles that the touch function of the tilt/slide sunroof is no longer working, one possible cause is an interruption to the voltag...



...[Previous 10 pages] ... 283 | 284 | 285 | 286 | 287 | 288 | 289 | 290 | 291 | 292...[Next 10 of 359 pages] ...
footerlogo
popup