Search 4,511 docs, articles & videos from the world’s leading Automotive part manufacturers
3584 PDF Files Listed
-
-
Technical Bulletin
- Friction plate position during fitment
-
Nov 17
- Valeo (135)
-
...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...
-
-
Technical Bulletin
- Prevoius Technical Bulletins from Valeo Technical Newsletter WK45
-
Nov 17
- Valeo (135)
-
...CL 043 Fitment of friction plate in 828118, 837322 & 837394 Vehicles: Citroen C4 Picasso, C5 1.6HDi Peugeot 3008, 5008, 508 1.6HDi Valeo Technical Support receives a number of calls regarding the fitment of the friction plate in clutch kit 828118...
-
-
Technical Bulletin
- Brake Pads Fitted with wire clamps on the back plate
-
Nov 17
- Apec Braking (40)
-
...Some Brake Pads are fi tted with wire clamps on the back plate. The inner (piston side) pads are fi tted with wire clamps. These must be correctly seated into the external groove cut into the piston. This device ensures that the pad remains in contact with the piston at all times and is...
-
-
Technical Bulletin
- Different size & type of back plate springs
-
Nov 17
- Apec Braking (40)
-
...Correct fi tment of inner and outer pads when fi tted with different size or type of backplate spring. Brake Pads with inner and outer pads are often fi tted with a diff erent size or type of backplate spring. The inner and outer pads are not interchangeable. Care must be taken to ide...
-
-
Technical Bulletin
- Disc with integral bearing fitting instructions
-
Nov 17
- Apec Braking (40)
-
...Ensure the axle is completely clean and slide the disc carefully on to the axle, taking care not to force the bearing inner ring out of alignment If the bearing inner ring has moved outwards, it must be re-aligned with the outer ring before fi tting the retaining nut. Rotate the disc by...
-
-
Technical Bulletin
- Mercedes HGV 10.7 to 12.8 Heavy Duty Tensioner Design Change
-
Nov 17
- Gates (127) Contact
-
...TT014 v1.0 › 09/2016 › Pag. 1/1 The manufacturers reserve the right to amend details where necessary. © Gates Corporation 2017 TT017v1.0 11/2017 Pag. 1/1 0094-64003 Heavy Duty tensioner T38667 Mercedes 10.7 – 12.8...
-
-
Technical Bulletin
- Citroen Starter Aletrnator Reversible System (StARS)
-
Oct 17
- Valeo (135)
-
...abcd StARS stands for Starter Alternator Reversible System. The StARS combines the alternator and starter functions in a single component. Its main feature is that it stops the engine when the vehicle is stopped and instantaneously quietly restarts it when a gear is engaged or the brake p...
-
-
Technical Bulletin
- Skoda Octavia Power Window Malfunction
-
Oct 17
- Valeo (135)
-
...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...
-
-
Technical Bulletin
- Land Rover Clutch Heavy Duty Clutch Release Arm
-
Oct 17
- Valeo (135)
-
...www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 523732 CL-041 2013 www.valeoservice.co.uk Valeo Service (UK) Ltd, Heming Road, Washford, Redditch, Worcestershire, B98 0DZ Tel: 01527 838300 Fax: 01527 52...
-
-
Technical Bulletin
- Previous Valeo Technical Bulletins
-
Oct 17
- Valeo (135)
-
...CL 037 Signs worn DMF causes clutch failure Vehicles: All Models with DMF Setup When a Dual Mass Flywheel (DMF) starts to fail, there are tell tale signs on the clutch kit fitted that will help to indicate this. - Markings on the pressure plate (Top Right) On the clutch pressure pla...
