...Technical Information Golf V Retrofit cornering light DynaView® Evo 2 General points With the "DynaView Evo2", Hella has developed the world's first retrofit cornering light system that switches on in addition to the low beam. It combines the safety functions cornering light and fo...
...Audi A3 2.0 TDI PD Model year from 2003 Replacing the light source Since the working steps are identical for both sides for this vehicle, they are explained using one side as an example. First switch the ignition off. Low beam: - Press the release lever of the cover cap downwards and...
...Honda Accord 2.2 CTDI Model year from 2003 With xenon light Replacing the light source When replacing the light source, proceed as follows. First switch the ignition off. Driver side: Low beam: - Unscrew the screw from the earth strap (above the headlight) and place it to one side. - U...
...VW Beetle 1.9 TDI PD Replacing the light source Since the working steps are identical for both sides for this vehicle, they are explained using one side as an example. First turn the ignition off. Low beam: - Release the headlight housing. To do this, use a hexagon nut (size 5) to t...
...Ford Galaxy Seat Alhambra VW Sharan Model year: up to 01/1998 Engine: 1.9 TDI Loss of coolant If there should be complaints about a loss of coolant with the above-mentioned vehicles, this can be caused by the overflow hose being damaged or having slipped. In the case of vehicles built be...
...Ford Mondeo Model year: up to 11/1995 Engine: 1.8-litre turbo diesel With air conditioner Engine cannot be switched off with the air conditioner switched on If the warmed-up engine of the above-mentioned vehicles cannot be switched off, the vehicle has possibly not been retrofitted with...
...Technical Information Thermal oil-level sensor General points The thermal oil-level sensor has the task of monitoring the oil level and the oil temperature. It is installed in the oil pan from below. The oil-level sensor components (level sensor, temperature sensor and sensor electroni...
...We have encountered several cases of flywheel (spigot) bearing failure on some Mitsubishi models. The flywheel should be carefully checked or replaced when installing a new clutch assembly. The following points should be noted during routine clutch replacements: A seized flywheel bearing m...
...Ford Focus All models from 08.1998 – 04.1999 Water penetration in the front footwell. If there are complaints with these vehicles about water penetrating the front footwell, one possible cause is poor sealing between the cowl grille and the windscreen. This affects the area above the in...
...Peugeot 206 All models from 09.2001 – 07.2002 Fuel gauge shows incorrect reading. If there are complaints with these vehicles that the fuel gauge indicates that the tank is still ¼ full even though it is actually empty, one possible cause is incorrect data exchange between the instru...